Welcome to Xinhai
High frequency vibrating screens are the most important screening machines primarily utilised in the mineral processing industry. They are used to separate feeds containing solid and crushed ores down to approximately 200μm in size, and are applicable to both perfectly wetted and dried feed.
Output size 10 350mm Vibrating screen is mainly used for continuous and uniform feeding in front of the coarse crushing crusher, and at the same time, it can screen fine materials to increase the crusher processing capacity.
Iron ore, limenite ore concentration plants Used to size control and concentrate grading. High frequency vibration fine screen screening efficiency, the product is enriched under the effect of screening significantly, thereby increasing the selection of selected grade .
Typically there was a high frequency band around 200 kHz with a wide beam that was good at finding fish in less than 100 200 feet of water. A lower frequency signal around 50 Khz signal has a more narrow beam and works well at finding fish and structure below 100 200 feet.
Custom sizes, frequency range of 600 cpm to 1200 cpm, high amplitude up to 7/16inch stroke. Ideal for medium to coarse separation of coal, aggregates, ore, glass, building waste, up to 4inch screen openings, from 4 square feet to 100 square feet screen sizes.
Screen supported on high quality coil compression springs to ensure isolation of vibration with mountings allowing adjustability of screen operating angle. Feed and discharge trays are fitted as standard to assist with chute distribution of materials. Screens include the ability to fit water sprays as standard when application requires.
Aimixs high frequency vibrating screen usually adopts V belt driving device. Besides, the structure of vibrating screen is simple, and the rotation speed of vibrator can be chosen arbitrarily. But the belt is easy to slip when running, and the screen mesh may be blocked. The horizontal vibrating screen is also driven directly by the coupling.
increases active screen area by up to 67%. The design is simple: a standard diameter frame is modified to accommodate a standard screen on the bottom with an additional, slightly smaller screen above. Material fed to the top screen either passes through the screen or discharges off the sides to be rescreened by the lower screen.
VibraScreener is a leader in the manufacture of high quality round and rectangular screeners, vibratory sieves and gyratory sifters for a range of industries, including pharmaceutical, food amp; beverage, chemical, nutraceutical, cosmetics, ceramics, metal powder, powder coating and more.
Copyright © 2021.Company name All rights reserved.